OM Digital Solutions

Pairing the Camera and Smartphone (Wi-Fi Connection)

Follow the steps below when connecting the devices for the first time.

  • Adjust pairing settings using OM Image Share, not the settings app that is part of the smartphone operating system.
  1. Launch the copy of the dedicated OM Image Share app previously installed on your smartphone.

  2. Tap the J icon displayed on the shooting standby screen.

    • You can also perform the following operations.

      Super control panel

      • CA

      Menu

      • MENU U e U 4. Wi-Fi/Bluetooth U Wi-Fi Connection
  3. Select [Device Connection] and press the OK button.

  4. Follow the on-screen guide to adjust Wi-Fi/Bluetooth® settings.

    • The Bluetooth local name and passcode, the Wi-Fi SSID and password, and a QR code are displayed in the monitor.

      1. Bluetooth local name

        Bluetooth Passcode

      2. Wi-Fi SSID

        Wi-Fi Password

      3. QR code

  5. Tap the camera icon at the bottom of the OM Image Share display.

    • An [Easy Setup] tab will be displayed.

  6. Follow the on-screen instructions in OM Image Share to scan the QR code and adjust connection settings.

    • If you are unable to scan the QR code, follow the on-screen instructions in OM Image Share to adjust settings manually.

      • Bluetooth®: To connect, select the local name and enter the passcode displayed in the camera monitor into the Bluetooth settings dialog in OM Image Share.
      • Wi-Fi: To connect, enter the SSID and password displayed on the camera monitor into the Wi-Fi settings dialog in OM Image Share.
    • A on the screen will turn green when pairing is complete.

    • The Bluetooth® icon indicates the status as follows:

      • C: The camera is emitting wireless signal.
      • D: Wireless connection has been established.

  7. To end the Wi-Fi connection, press MENU on the camera or tap B on the monitor screen.

    • You can also turn the camera off and end the connection from OM Image Share.
    • At default settings, Bluetooth® connection is kept active even after Wi-Fi connection is terminated, allowing you to shoot remotely with a smartphone. To set the camera to also terminate Bluetooth® connection when terminating Wi-Fi connection, set [Bluetooth] to [Off].