OM Digital Solutions

Using the LED illuminator

Unlike the flash, which lights up only briefly, the LED illuminator stays lit for longer periods. It can also serve as a flashlight.

Turning the LED illuminator on

  1. Press and hold the INFO button.

  2. Release the button when the LED illuminator lights up.

    • The illuminator will light up even if the camera is off.

If the camera is on

The LED illuminator will remain lit for up to around 90 seconds while camera controls are in use, or up to 30 seconds if no operations are performed.

  • The LED illuminator can be used during movie recording. It cannot, however, be used to film 4K movies.

If the camera is off

The LED illuminator will remain lit for up to around 30 seconds, whether or not you attempt to operate camera controls.

  • The LED illuminator turns off automatically if you:

    • press the ON/OFF button,
    • use the LOG switch,
    • display the menu,
    • connect or disconnect a USB cable, or
    • connect to a Wi-Fi network.

To turn the LED illuminator off

Press and hold the INFO button down until the LED illuminator turns off.