Error codes

Monitor indication	Possible cause/Corrective action
No Card	No card inserted or card not recognized. Insert a card or remove and reinsert the current card.
Card Error	There is a problem with the card. Insert the card again. If the problem persists, format the card. If the card cannot be formatted, it cannot be used.
Write Protect	Writing to the card is prohibited. The card write-protect switch is set to the “LOCK” side. Return the switch to the unlocked position (“Usable cards”).
Card Full	The card is full and no additional pictures can be taken. Replace the card or erase unwanted pictures. Before erasing, download important images to a PC.
Card Full	There is no space in the card. Replace the card or erase unwanted pictures. Before erasing, download important images to a PC.
No Picture	There are no pictures to play back. The card contains no pictures. Take pictures before beginning playback.
Picture Error	The selected file is damaged and cannot be played back. Alternatively, the picture is in a format that is not supported by the camera. View the picture using computer imaging software or another method. If the picture cannot be displayed on a computer, the file may be corrupt.
The Image Cannot Be Edited	Camera retouch features cannot be applied to pictures recorded with other devices. Retouch the picture on a computer or other device.
Y/M/D	The clock is not set. Set the clock (“Initial Setup”).
	The internal temperature of the camera has risen due to sequential shooting. Turn off the camera and wait for the internal temperature to cool.
Internal camera temperature is too high. Please wait for cooling before camera use.	The internal temperature of the camera has risen due to sequential shooting. Wait a moment for the camera to turn off automatically. Allow the internal temperature of the camera to cool before resuming operations.
Battery Empty	The battery is exhausted. Charge the battery.
No Connection	The camera is not correctly connected to a computer, HDMI display, or other devices. Reconnect the camera.
Logging function cannot be used at this time.	The area of camera memory used for temporary storage of the log file is full. Insert a card or confirm that the current card is correctly inserted and transfer to log file to the card.
The battery is exhausted. Charge the battery.
The camera is connected to a television or other device via an HDMI cable. Disconnect the HDMI cable.
The USB-AC adapter is being used to supply power to the camera from an electrical outlet while the battery is removed. Insert the battery and unplug the USB-AC adapter from the outlet.
Card log capacity is full. Cannot record new log files.	The current log cannot be saved to the card. Copy log files to a computer and delete them from the card. Each card can store up to 199 log files.
(Blinking)	The current log has not been saved to the card. Insert a card or confirm that the current card is correctly inserted and transfer to log file to the card.
The current log cannot be saved to the card. Copy log files to a computer and delete them from the card. Each card can store up to 199 log files.
There is a problem with the card. Insert a new card.
Writing to the card is prohibited. The card write-protect switch is set to the “LOCK” side. Return the switch to the unlocked position (“Usable cards”).
There is no space in the card. Replace the card or erase unwanted pictures. Before erasing, download important images to a PC.
(Solid)	The area of camera memory used for temporary storage of the log file is full. Insert a card or confirm that the current card is correctly inserted and transfer to log file to the card.
The battery is exhausted. Charge the battery.
The camera is connected to a television or other device via an HDMI cable. Disconnect the HDMI cable.
The USB-AC adapter is being used to supply power to the camera from an electrical outlet while the battery is removed. Insert the battery and unplug the USB-AC adapter from the outlet.
The clock is not set. Set the clock and select a time zone.

Monitor indication

Possible cause/Corrective action

No Card

No card inserted or card not recognized.

Insert a card or remove and reinsert the current card.

Card Error

There is a problem with the card.

Insert the card again. If the problem persists, format the card. If the card cannot be formatted, it cannot be used.

Write Protect

Writing to the card is prohibited.

The card write-protect switch is set to the “LOCK” side. Return the switch to the unlocked position (“Usable cards”).

Card Full

The card is full and no additional pictures can be taken.

Replace the card or erase unwanted pictures.

Before erasing, download important images to a PC.

Card Full

There is no space in the card.

Replace the card or erase unwanted pictures.

Before erasing, download important images to a PC.

No Picture

There are no pictures to play back.

The card contains no pictures.

Take pictures before beginning playback.

Picture Error

The selected file is damaged and cannot be played back. Alternatively, the picture is in a format that is not supported by the camera.

View the picture using computer imaging software or another method.

If the picture cannot be displayed on a computer, the file may be corrupt.

The Image Cannot Be Edited

Camera retouch features cannot be applied to pictures recorded with other devices.

Retouch the picture on a computer or other device.

Y/M/D

The clock is not set.

Set the clock (“Initial Setup”).

The internal temperature of the camera has risen due to sequential shooting.

Turn off the camera and wait for the internal temperature to cool.

Internal camera temperature is too high.

Please wait for cooling before camera use.

The internal temperature of the camera has risen due to sequential shooting.

Wait a moment for the camera to turn off automatically.

Allow the internal temperature of the camera to cool before resuming operations.

Battery Empty

The battery is exhausted.

Charge the battery.

No Connection

The camera is not correctly connected to a computer, HDMI display, or other devices.

Reconnect the camera.

Logging function cannot be used at this time.

The area of camera memory used for temporary storage of the log file is full.

Insert a card or confirm that the current card is correctly inserted and transfer to log file to the card.

The battery is exhausted.

Charge the battery.

The camera is connected to a television or other device via an HDMI cable.

Disconnect the HDMI cable.

The USB-AC adapter is being used to supply power to the camera from an electrical outlet while the battery is removed.

Insert the battery and unplug the USB-AC adapter from the outlet.

Card log capacity is full.

Cannot record new log files.

The current log cannot be saved to the card.

Copy log files to a computer and delete them from the card.

Each card can store up to 199 log files.

(Blinking)

The current log has not been saved to the card.

Insert a card or confirm that the current card is correctly inserted and transfer to log file to the card.

The current log cannot be saved to the card.

Copy log files to a computer and delete them from the card.

Each card can store up to 199 log files.

There is a problem with the card.

Insert a new card.

Writing to the card is prohibited.

The card write-protect switch is set to the “LOCK” side. Return the switch to the unlocked position (“Usable cards”).

There is no space in the card.

Replace the card or erase unwanted pictures.

Before erasing, download important images to a PC.

(Solid)

The area of camera memory used for temporary storage of the log file is full.

Insert a card or confirm that the current card is correctly inserted and transfer to log file to the card.

The battery is exhausted.

Charge the battery.

The camera is connected to a television or other device via an HDMI cable.

Disconnect the HDMI cable.

The USB-AC adapter is being used to supply power to the camera from an electrical outlet while the battery is removed.

Insert the battery and unplug the USB-AC adapter from the outlet.

The clock is not set.

Set the clock and select a time zone.