Zoom (digital teleconverter)

Zoom in on the center of the frame and record. In P, A, and n modes, the zoom ratio increases by about 2×. When f (Microscope Control) is selected in 7 mode, you have a choice between 2× and 4× zoom.

1. Rotate the mode dial to P, A, n, or 7.

   • If the mode dial is rotated to 7, select f (Microscope Control).

   

2. If the mode dial is rotated to P, A, or n, press H.

   If the mode dial is rotated to 7, press I.

   • If the mode dial is rotated to P, A, or n, the monitor display zoom is increased by 2×, and S is displayed. Images are recorded at the selected zoom ratio. Press H again to cancel zoom.

   

   • If the mode dial is rotated to 7, pressing I increases zoom by 2×. Press I again for 4× zoom, and a third time to cancel zoom.

• JPEG images are recorded at the selected zoom ratio. In the case of RAW images, a frame shows the zoom crop. A frame showing the zoom crop is displayed on the image during playback.
• In the case of 4K and high-speed movies, the digital teleconverter is automatically disabled when recording starts.
• [AF Area] is fixed at [X] (single target).