Performing the sequential/self-timer shooting

Adjust settings for burst or self-timer photography. Choose an option according to your subject. Other options, including anti-shock and silent modes, are also available.

• Fix the camera securely on a tripod for self-timer shooting.

F/E A	Single	Single-frame advance. The camera takes one photo each time the shutter button is pressed all the way down.
g/F	Sequential	The camera takes photos at up to about 6 fps while the shutter button is held all the way down. If [C-AF], [C-AFJ], [C-AF+TR], or [C-AF+TRJ] is selected for [KAF Mode], the camera will focus before each shot. When [Metering during g] is set to [Yes], the camera will meter the brightness and determines the exposure before each shot.
B	Silent Sequential	The camera takes photos at up to about 10 fps while the shutter button is held all the way down. If [C-AF], [C-AFJ], [C-AF+TR], or [C-AF+TRJ] is selected for [KAF Mode], the camera will focus before each shot. When [Metering during g] is set to [Yes], the camera will meter the brightness and determines the exposure before each shot.
BH	Silent Sequential H	The camera takes photos at up to about 30 fps while the shutter button is held all the way down. Focus, exposure, and white balance are locked at the values for the first shot in each series.
ProCap ProCapH	Pro Capture	Capture starts when the shutter button is pressed halfway. The camera starts recording pictures, including those captured while the button was pressed halfway, when the button is pressed all the way down (“Shooting without a release time lag (Pro Capture shooting)”). Focus and exposure during each ProCap mode are the same as [B] (Silent Sequential) and [BH] (Silent Sequential H).
Y12s/r12s q12s	Self-timer 12 sec	The shutter is released 12 seconds after the shutter button is pressed all the way down. The self-timer lamp will light for about 10 seconds and then start to flash about 2 seconds before the shutter is released. The camera focuses when the shutter button is pressed halfway.
Y2s/r2s q2s	Self-timer 2 sec	When the shutter button is pressed all the way down, the self-timer lamp will start to flash and a photo will be taken after about 2 seconds. The camera focuses when the shutter button is pressed halfway.
YC/rC qC	Custom Self-timer	Adjust self-timer settings, including the self-timer delay and the number of shots taken when the timer expires (“Configuring the self-timer functions (Self-timer Settings)”).

• You can choose the frame advance rate and the maximum number of shots in each series (“Configuring the sequential shooting functions (Sequential Shooting Settings)”).
• Items marked with t allow you to take pictures with the small amount of blur caused by operation of the shutter reduced. Use this option when even slight camera motion can cause blur, for example during macro or telephoto photography. This is configured when [Anti-Shock H] is set to [On] in [Anti-Shock H Settings].
• Items marked with s use the electronic shutter. Use these with shutter speeds faster than 1/8000 seconds, or in settings where the sound of the shutter would be unwelcome.
• To cancel the activated self-timer, press G.
• In g, F, B and ProCap modes, the camera displays the view through the lens during shooting. In BH mode, it displays the shot immediately preceding the current frame.
• In ProCap mode, the lower limit of the shutter speed is 1/10 s.
• In ProCapH mode, the lower limit of the shutter speed is 1/30 s when [Max fps] in [Sequential Shooting Settings] is set to [30fps], 1/20 s when set to [20fps], and 1/15 s when set to [15fps].
• Shooting speed will be lower when [KISO] is 8000 or higher.
• In silent photography, the flash sync speed is 1/50 s. It is set to 1/20 s when [KISO] is 8000 or higher.
• If you stand in front of the camera to press the shutter button when using the self-timer, the picture may be out of focus.
• The speed of sequential shooting varies depending on the lens you are using and the focus of the zoom lens.
• During sequential shooting, if the battery level icon blinks due to low battery, the camera stops shooting. The camera may not save all of the pictures depending on how much battery power remains.
• Photographs taken in silent and Pro Capture modes may be distorted if the subject or camera moves quickly during shooting.
• To use the flash in silent shooting modes, select [Allow] for [Flash Mode] in [Silent I Settings].
• Shooting speed may be lower when shooting in a dark place. You may be able to increase shooting speed by setting [KNight Vision] to [Off]. g “Making the display easier to see in dark places (KNight Vision)”