OM Digital Solutions

Copying Pictures to the Computer (Storage/MTP)

You can transfer images by connecting the camera to your computer as a card reader or portable device.

  1. After confirming that the camera is off, connect it to the computer using the USB cable.

    1. USB port
    2. USB cable (supplied)
    3. USB connector
    • The locations of USB ports vary from computer to computer. See the documentation provided with the computer for information on USB ports.

  2. Turn the camera on.

    • The camera will display a message prompting you to identify the device to which the USB cable is connected.
    • If the message is not displayed, select [Select] for [USB Mode].
    • If the batteries are very low, the camera will not display a message when connecting to a computer. Be sure the batteries are charged.

  3. Highlight [Storage] or [MTP] using FG and press the OK button. Press the OK button.

    [Storage]: The camera functions as a card reader.

    [MTP]: The camera functions as a portable device.

  4. The camera will connect to the computer as a new storage device.

  • Data transfer is not guaranteed in the following environments, even if your computer is equipped with a USB port.

    • Computers with a USB port added by means of an extension card, etc., computers without a factory-installed OS, or home-built computers
  • Camera functions cannot be used while the camera is connected to the computer.
  • If the computer fails to detect the camera, disconnect and reconnect the USB cable.
  • When [MTP] is selected, movies exceeding 4 GB cannot be copied to the computer.
  • The camera battery may also be charged while connected to a computer via USB when the ON/OFF lever is in the OFF position. Charging time varies significantly depending on the performance of the computer and other devices.